Porsche 944 - Front Bumper Bar

The Front Bumper replicates the Front Bumper of the stock Porsche 944 Turbo.
As used on all of the Porsche 944 Challenge series cars.

Porsche 944 - Rear Bumper Bar

The Rear Bumper replicates the Rear Bumper of the stock Porsche 944 Turbo.

As used on all of the Porsche 944 Challenge series cars.

Porsche 944 - Front Guard / Wing - RIGHT

The front guards replicate the front guards of the stock Porsche 944 Turbo
As used on all of the Porsche 944 Challenge series cars.

These guards are designed to fit the Turbo front bumper

Porsche 944 - Front Guard / Wing - LEFT

The front guards replicate the front guards of the stock Porsche 944 Turbo
As used on all of the Porsche 944 Challenge series cars.

These guards are designed to fit the Turbo front bumper

Porsche 944 - Bonnet

The bonnet replaces the heavier factory bonnet for the 944 challenge car.

The Fiberglass is ready to bolt onto the existing hinges.

As used on all of the Porsche 944 Challenge series cars.

Porsche 944 - Rear Spoiler

The Fiberglass Rear Spoiler replaces the Rubber spoiler on the rear and sides of the stock Porsche 944 Turbo hatch. The existing hatch frame is still required for the factory glass.

As used on the Porsche 944 Challenge series cars.

Porsche 944 - Dashboard - Left Hand Drive

The Fiberglass Dashboard is for Left Hand Drive vehicles and is designed to replace the heavy and worn out factory dashboard. Suitable for both series 1 & 2 cars, and can be cut to suit to fit around roll cages, gauges etc.

As used on the Porsche 944 Challenge series cars.

Porsche 944 - Headlight Panel

The Headlight Panel replaces the non-functioning pop-up headlights and central panel for the 944 challenge cars replicates this section of the stock Porsche 944 Turbo.

As used on all of the Porsche 944 Challenge series cars.

Porsche 944 - Dashboard - Right Hand Drive

The Fiberglass Dashboard is for Right Hand Drive vehicles and is designed to replace the heavy and worn out factory dashboard. Suitable for both series 1 & 2 cars, and can be cut to suit to fit around roll cages, gauges etc.

As used on the Porsche 944 Challenge series cars.

Porsche 944 - Centre Console

The Fiberglass Centre Console is designed to replace the heavy and worn out factory console. Suitable for both series 1 & 2 cars, and can be cut to suit to fit around roll cages, gauges etc.

As used on the Porsche 944 Challenge series cars.

Porsche 944 - Sunroof Panel

The Fiberglass Sunroof Panel replaces the existing sunroof on the 944 models. This is required to be bonded in place and fixed into place and saves weight from the factory sunroof panel.

As used on the Porsche 944 Challenge series cars.